Dipstick

Previous 1 / 3 Next

Dipstick Others


Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)Face® Dipstick® Profiler Precise, Accurate & Repeatable (Concrete/Pavement Flatness & Levelness)

Dipstick® Capabilities

Dipstick® was invented and developed specifically for measuring the flatness and levelness of floors. However, because of its inherent ability to measure elevation differences very precisely, the Dipstick has been found to have other uses that can be very valuable. Here is a short list of some of the possible uses of the Dipstick:

1. Measuring the flatness and levelness of floors using the ASTM E-1155 F-Number system (FF and FL). The Dipstick is the fastest and by far the most accurate way to measure floor flatness and levelness.

2. Measuring the elevations of concrete forms before placement of concrete. It has been shown that concrete is never flatter nor more level than when it is first struck off from the forms, so the levelness of the forms can be the limiting factor in how level the concrete floor can be.

3. Measuring the straightness or ''trueness'' of any tools used to strike off or float wet concrete, such as screeds, highway straightedges, floats, and the like. It has been shown that the finish flatness and levelness of cured concrete is directly affected by any bends, ''kinks'', or dents in these tools.

4. Making precise elevation surveys within a limited area for specialized reasons, such as the mounting of certain types of industrial or laboratory-type equipment.

5. A similar but more detailed elevation survey that produces a 3-D picture of the surface can be very useful in certain applications.

6. Setting the elevations of bridge-deck rails. It has been shown that the finished bridge deck surface follows the contours of the temporary rail upon which the bridge deck screeds ride. The
smoothness of the finished curved surface depends substantially on the smoothness of the curve of the rails. The Dipstick can provide a table of corrections, either visible on the screen of the Dipstick's computer, or printed out, for the crew to make to bring the rail to the desired curve.

7. Measuring the thickness of fills and coatings, such as skim coats and asphalt overlays. Since the Dipstick® is capable of calculating and displaying the difference between any two lines, if one line is run on the subgrade before the skim coat or filler is applied, and one line is run at the same location afterwards, the difference between the two is equal to the thickness of the overlay. The high degree of precision and accuracy of the Dipstick (to within 0.001'') and the fact that the difference or thickness is calculated and displayed every 1 foot along the measurement line, makes the Dipstick a useful tool for this purpose.

8. Measuring the difference in elevation across construction joints, where the two slabs are supposed to be at the same plane.

9. Measuring the motion of a slab as a piece of heavy equipment passes over a joint. If the Dipstick is placed so that each end of the Dipstick is resting on a different slab, across a construction joint, and a heavy fork lift is driven across the joint nearby, the Dipstick can measure the deflection of the slabs at the joint in real time.

10. Measuring the actual as-built slope of a tilted surface such as a ramp or drain.

11. Measuring the camber of girders and beams both before and after loading. The difference between them is the amount of bending the beam has undergone.

12. Actually, the Dipstick excels at just about any application where very precise elevation differences are desired.

13. In addition to measuring at a precise 12'' interval, all new model Dipsticks can also measure at 300mm and 250 mm spacing without any mods or attachments, and a variable foot spacer bar (standard with the Road model Dipstick) is available that will allow measurement at any spacing between 3'' or 75 mm and 12'' or 300mm. An additional adapter can be used to measure at 24'' or 500mm intervals.

14. The Dipstick's built-in software will provide a report in text form and a graph of the profile(s), either of which can be displayed on the Dipstick computer's screen or printed. Tables of elevations and elevation differences can be viewed on the Dipstick computer's screen, printed, or an ASCII text file can be created from the data which can be read into any spreadsheet, word processor, or other ancillary program.

Operation

The Dipstick® Floor Profiler stands on two support legs. The operator simply “walks” the Dipstick along a survey line alternately pivoting the instrument about each leg.

Two digital displays show the elevation difference between the Dipstick’s two support legs. Audible and visual signals alert the operator when each elevation difference reading is measured and automatically recorded.

Advantages

The Dipstick® Floor Profiler is a totally integrated data collection instrument that provides a fast and accurate method of measuring floors for flatness and levelness using the American Concrete Institute (ACI), Canadian Standards Association (CSA), and American Society for Testing and Materials (ASTM) standards.

•    Calculates F-Numbers for Runs, Sections, and Surfaces on-site

•    Instantly produces profile graphs on-site

•    “Instant” downloading to desktop or laptop computer

•    Automatic zeroing

•    Prints reports to any printer (network or direct)

•    Create precise ASCII elevation files for all your data in seconds

•    Computer includes a built-in copy of “1155 HelperTM

•    Is delivered as a kit in a custom Zero Haliburton case

•    Calculates “1/8 in ten and ¼ in ten” and TR 34 and DIN 18202 too

•    NEW – can produce FMIN reports and TR 34 for defined traffic aisles

•    Can produce 3D maps of the floor surface

•    2-year warranty on all Parts & labor – NEVER Needs Recalibrating

 

Fast, Easy and Compact

•    Lay out slabs per ASTM requirements in seconds

•    Measure, analyze, and report combined F-Numbers on 1,000m2 of slab in 30 minutes or less

•    Instant on-slab F-Number analysis

•    Complete kit is sized as carry-on luggage

•    Extremely fast, efficient and accurate – the fastest Dipstick® ever

Accurate

•    FF, FL, and elevation data proven over millions of measurements

•    Class I instrument approved by state, federal and foreign governments

•    Dipsticks are used on all continents except Antarctica

•    The most accurate floor profiling instrument made

      World standards bodies use Dipstick® to compare other profilers

Versatile Floor Instrument

•    Change data spacing in seconds between 12”, 300mm, and 250mm

•    Only Dipstick® can be stepped over cords, rebar and debris

•    Only Dipstick® can be used to set forms

•    Only Dipstick® can be used to check deflection of beams and girders, and thickness of overlays

Everything Included

•    Windows CE On-Board computer and Windows® compatible software for your PC or laptop included

•    Rechargeable on-board power system powers the Dipstick® and computer for more than 10 hours

•    Comes equipped with a HP720 Windows CE computer

•    Works with all version of Windows® including Windows®10

•    SD Cards reader included for “Drag & Drop” automatic data transfer to your PC

•    Viewing screen & virtual keyboard – cannot absorb rain or sweat

•    Includes LED Voltmeter display for Battery Handle

•    Includes the newest version of DipFloor TM 6 for Windows

•    Includes Face’s “1155 Helper TM” program built into the on-board tablet software and an Excel® version for your desktop PC

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter